About X-33 X-33 Program Status X-33 Tank Report X-33 Demonstrator Specs Internal/External Configuration Flight Profile X-33 Images Internet Cameras IPIX™ Images Gallery Partners Search the Space Transportation Site: Home Contacts FAQ NASA Web Policy

X-33 Program Status November 4, 1999 Media Advisory 99-278 Tank Damage Discovered Damage was discovered Wednesday evening to one wall of the X-33's composite liquid hydrogen tank currently undergoing cryogenic and structural loads testing at NASA Marshall Space Flight Center in Huntsville, Ala. Long considered the major technology challenge for X-33, the tank's test crews discovered the damage at approximately 6:45 p.m. CST while viewing the tank over video monitors, approximately two hours after the completion of a test cycle which appeared to be nominal. At the time, crews were preparing to use a gaseous helium purge in order to secure - or safe -- the tank for the evening. Earlier in the day, the tank had passed a pressure test with a full load of liquid hydrogen, and also a structural loads test to simulate the force of the X-33's fully loaded liquid oxygen tank sitting atop the liquid hydrogen tank. The X-33's internal structure will experience these same loads prior to test flight as the vehicle is fueled while standing vertically on its launch pad. Wednesday's run was the fifth test in a series of validation tests being conducted on the tank. A joint NASA-Lockheed Martin team is convening at the Marshall Center to analyze the nature and extent of the damage and determine its probable cause. Impact to the X-33 program is not known at this time. NASA is committed to developing advanced space transportation; a commitment which includes looking at alternative technologies to ensure the success of the X-33. The Lockheed Martin Skunk Works in Palmdale, CA, is developing the X-33 technology demonstrator under a cooperative agreement with NASA. Alliant TechSystems in Clearfield, UT, and Lockheed Martin Skunk Works, fabricated components for the vehicle's hydrogen tanks while a joint Lockheed Martin-Alliant team working in Sunnyvale, CA, completed the assembly. Back to X-33 Program Status